3-Cell Battery/Charger Completer Pack with 2 Batteries

FEATURES:

#2972 Charger (TRAP2972)
Charges 2-cell and 3-cell LiPo batteries, 5-8 cell NiMH batteries
Traxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped batteries

- Charges two batteries simultaneously at up to 50W (4 amps) each, or charges single battery at 100W (8 amp) output in High-Output mode
- Charges a NiMH and LiPo at the same time
- Advanced Mode for full manual control of charger settings
- Progress bar and audible alerts
- Storage Mode prepares LiPo batteries for extended storage
- 30 day limited warranty through Traxxas beginning at date of purchase

#2872X Batteries (TRAC2873)
- Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail
- Engineered specifically to fit Traxxas models
- New high current connector with gold-plated copper terminals and integrated balance connector
- iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery
- MAXX cable high-efficiency 12 gauge silicone jacketed wire

INCLUDES:

Traxxas EZ-Peak 100W Dual Battery Charger with AC Power Cord, Instructions, Cooling Fan, Two Power Cell 11.1V 5000mAh 25C LiPo 3S Batteries with High Current Connectors and Integrated Balance Plugs.

SPECS:
Charger;
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (dual mode), 5-8A (high output mode) Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Dimensions: 7 x 5.4 x 2.2" (176 x 138 x 57mm)

Batteries;
Configuration: 3S1P
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
Weight: 13.3oz (376g)